Technics SX-KN901

DISASSEMBLY
INSTRUCTIONS
Opening the cabinet
4. Turn the keyboard cabinet upside down as shown in
Fig. 1, and remove the bottom screws (® 23 pcs.).
2. Place the keyboard bottomside down, and open the
top cabinet .
[Fig. 1]
Removing
the
MAIN,
FAJ,
LCD,
CP1,
CP2
and
CP3
printed
circuit
boards
¢
Open
the
cabinet
(see
step
[1].
MAIN
P.C.B.
LCD,
CP1,
CP2,
CP3
P.C.B.
¢
Remove
the
MAIN
P.C.B.
mounting
screws
(®
4
pcs.).
41.
Remove
the
MAIN
and
FAJ
P.C.B..
FAd
P.C.B.
2.
Remove
the
shield
cover
mounting
screws
@
9
*
Remove
the
FAd
P.C.B.
mounting
screws
(@
4
pcs.,
@
pes.).
1
pc.
and
@
2pcs.).
.
Remove
the
LCD
P.C.B.
mounting
screws
(@
2pcs.).
.
Pull
off
the
MAIN
VOLUME
knob.
.
Remove
the
CP1,
CP2
and
CP3
P.C.B.
mounting
screws
(®
7
pcs.,
@
ipc.,
©
4pcs.
and
@
3pcs.).
P.C.B.
Shield Cover
Kena} P.c.B.
MAIN
VOLUME
cope
ade
P.C.B.
P.C.B.
[Fig. 2]