Technics SX-P50

Organ Presets
You can produce organ sounds when the ORGAN PRESETS button in the SOUND section is on. There are 9 different
organ sounds provided for you to choose from.
To produce organ sounds
1.Turn on the ORGAN PRESETS button.
SOUND
EEAO) EMANA
Ф Uo wmm ega eo птш оса. EZ)
OOO озове
PIANO
2.Press any key on the keyboard to hear the organ
sound.
To select a sound
1.Press and hold the ORGAN PRESETS button for about
3 seconds.
e The indicator flashes.
Mixing two sounds
2.Use the VALUE (TRANSPOSE) buttons to select an
organ sound.
TRANSPOSE
• The name of the sound is shown on the display.
C-1 to C-4: CLASSICAL (PIPE) ORGAN
sounds
J-1 to J-5: JAZZ ORGAN sounds
• Play the keyboard to hear the selected sound.
• When the name of an organ sound is indicated, only
an ORGAN PRESETS sound can be selected. To
select a different sound, press the ORGAN PRESETS
button to turn it off.
• To quickly select a sound, while pressing the ORGAN
PRESETS button, use the VALUE buttons to select
the sound.
• When a JAZZ ORGAN sound is selected, the DIGITAL
EFFECT button is used to switch the tremolo speed
(onzfast; offzslow).
You can play two different sounds at the same time, thus obtaining a composite sound having a depth not possible in
a single sound. The volume balance for each of the sounds can also be adjusted.
1.Press two SOUND buttons at the same time.
VOID
EPMO EMO?
ÕRÖOÖ Oš
e The indicators of the two selected buttons light up.
2.Press any key on the keyboard to hear the mixed
sound.
• The on/off status of the DIGITAL EFFECT is effective
for each sound. In addition, the BRILLIANCE and
DIGITAL REVERB settings are memorized for each
combination of sounds.
10
QQTG0606
Volume Balance
1.Press the two SOUND buttons continuously for 2 or 3
seconds.
e The indicators for the two sounds flash, and the current
volume balance is shown on the display.
2.Use the VALUE (TRANSPOSE) buttons to adjust the
volume balance.
TRANSPOSE
e Each time the UP button is pressed, the volume of the
right-side sound increases, and each time the DOWN
button is pressed, the volume of the left-side sound
increases. Play the keyboard to hear the volume
balance.
e It the two VALUE buttons are pressed at the same
time, the volume is equally balanced.
e On the display, the right-side sound is louder when a
number 1 to 10 is shown, and the left-side sound is
louder when a number —1 to —10 is shown.
3. When you have finished adjusting the volume balance,
press any SOUND button.