*Important safety notice: / Components identified by mark have special characteristics
important for safety. / Funrthermore, special parts which have purposes of fire-retardant
(resistors), high-quality sound (capacitors),low-noise (resistors), etc. are used. / When replacing
any of components, be sure to use only manufacture’s specified parts shown in the parts list.
*Capacity values are in microfarads (uF) unless specified otherwise, P=Pico-farads (pF) F=Farads
(F) / *Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM), 1M=1,000K
(OHM)
*The marking <RTL> indicates that the Retention Time is limited for this item. After the
discontinuation of this assembly in production, the item will continue to be available for a
specific period of time. The retentionperiod of availability is dependant on the type of assembly ,
and in accordance with the laws governing part and product retention. After the end of this
period, the assembly will no longer be available.
*Since SW consists of buttons and P.C.B.s, we do not supply it as an individual part (refer to “17.
Cabiner Parts Location “ and “18. Manual Keyboard Parts Location“.).
*“<IA>”,“<IB>”, marks in Remarks indicate languages of instruction manuals. [<IA> : American
English, <IB> : English / German / French / Spanish / Netherlands / Danish]
*[SPC] in Remarks columns parts that are supplied by S.P.C..
15
To Next Page
Loading...
