Technics SX-PR100 User Manual

In—-O2ZmM
Storing the rhythm
Not only chord progressions, but also rhythm changes, FILL
IN & INTRO, ENDING and BASS & ACCOMP patterns can be
stored in the PROGRAM CHORD COMPUTER.
@ Storing rhythm and BASS & ACCOMP pattern changes
Before storing a chord, press the RHYTHM and/or BASS &
ACCOMP buttons. A beep will sound and the rhythm and
patterns will be stored at the beginning of subsequent
measures. These stored rhythms and patterns will be
repeated until different rhythm and BASS & ACCOMP patterns
are selected.
— For FILL IN & INTRO storage:
Pressing the FILLIN & INTRO button at the beginning of asong
stores intro. Pressing the button after storage of a chord
stores the fill-in for one measure starting at the beginning of
the chord.
@ For ENDING storage:
If the ENDING button is pressed at the end of a song, the last
chord will be stored as an ending pattern. (The RECORD
button will be turned off.)
e Up to 25 selections of rhythm and BASS & ACCOMP
patterns can be stored. (Storing rhythm and BASS &
ACCOMP patterns in sequence is counted as one
selection.)
e If the chords are not specified and only the rhythm
changes are input, the PROGRAM CHORD COMPUTER
works as a rhythm sequencer.
@ Even when the chords are specified, with the AUTO PLAY
CHORD off, the ACCOMP and BASS do not sound; only the
programmed rhythm changes are produced.
Let’s store the following:
Chord | ¢ | F | Cc G7 Em | A7 | Dm G7
FILL IN & INTRO, ENDING INTRO | FILL IN
| RHYTHM SWING | 16 BEAT
| BASS & ACCOMP | 1 | 4
After first pressing the RECORD button, then the PCC button,
perform the storage operation as follows:
FILL IN & INTRO 16 BEAT BASS &ACCOMP4 |—>
Bie. eS. el ars PS el me a, el ere Ifo a ENDING
© If only the chord progression was stored, rhythm and
BASS & ACCOMP patterns can be added to the memory
later as part of a selection.
Let’s store the previous example, first storing the chords only
and then adding rhythm and BASS & ACCOMP patterns.
1. First, store only the chords.
SHR SHE SHES He Shi = Hoe}
| G7- Ay --| c- a b+ —-+{
2. Press the RECORD button and then the PCC button. 7. Press the FILL IN & INTRO button.
3. Press the FILL IN & INTRO button. 8. Press the 16 BEAT button.
4. Press the SWING button. 9. Press the BASS & ACCOMP 4 button.
5. Press the BASS & ACCOMP 1 button. 10. Press the forward key ( B> ) six times.
6. Press the forward key ( B ) four times to advance the 11. Press the ENDING button.
chord to the G7 position.
12

Technics SX-PR100 Specifications

General

Brand	Technics
Model	SX-PR100
Category	Musical Instrument
Language	English