Technics SX-PR100 - Page 17

Optional
Memory
Card
SY-P4
Your
performances
or
registrations
can
be
recorded
on
optional memory cards for storage.
These cards have two modes, PS (PLAY SEQUENCER) and FSC
(FULLBAND SETTING COMPUTER), which can be selected
with the MODE switch.
Only one mode, PS or FSC, can be used per card.
e The settings of TRANSPOSE and TEMPO are also recorded.
If the buttons are pressed or the slide control is moved
during playback, these effects will be changed to manual
control.
Technics
MEMORY CARD SY-P4
MODE switch
PROTECTOR switch
Set to ON to avoid accidental erasure of stored data.
PS mode
FSC mode
One PLAY SEQUENCER performance (same storage capacity as the piano’s internal memory)
20 performances worth of registrations not including PLAY SEQUENCER data
PS mode
Storage
Performance data are first stored in the piano’s memory, and
then transferred to the memory card.
1. Preparing the memory card.
1) Set the memory card’s MODE switch to PS and the
PROTECTOR switch to OFF.
2) Insert the memory card securely into the siot on the
right side of the panel on the piano.
2. Store the performance data in the piano’s memory. (Refer
to @).)
3. Transfer the contents of the piano’s memory to the
memory card.
1) Press the RECORD button. The indicator will flash.
2) Press the FSC button. The indicator will flash slowly.
3) Press the white PS/1 key.
Playback
1
. Insert the memory card with the stored performance data
into the slot.
Turn on the FSC button.
Press the white PS/1 key.
Press the START/STOP button. The stored song will be
played back automatically.
© Performing these procedures changes the piano memory
contents to the data stored on the memory card.
Pon
16