Technics SX-PR100 - Page 18

FSC mode
Using the FSC (FULLBAND SETTING COMPUTER), twenty
selections of registration (tones, effects, rhythms and their
combinations) or PROGRAM CHORD COMPUTER data can be
stored and easily recalled as required.
Storage
1. Set the memory card’s MODE switch to FSC and the
PROTECTOR switch to OFF.
2. Securely insert the memory card into the slot on the right
side of the panel on the piano.
. If necessary, store the chord progressions, etc., in the
PROGRAM CHORD COMPUTER. (Refer to @.)
. Set tones, effects, rhythms, etc.
If an intro is required, turn on the FILLIN & INTRO button.
. Press the RECORD button.
. Within 5 seconds press the FSC button.
. Within 5 seconds press any one of the white keys
numbered 1 through 20.
This stores registration data in the specified track number on
the memory card.
® Similarly, data can be recorded in the remaining track
numbers.
® If this step is repeated for a track number already used for
recording, the previous registration data is erased and
replaced with new data.
o
NOU @ a
Playback
1. Insert the memory card into the slot.
2. Press the FSC button.
3. Press the white key to specify the track number which
contains the registration data for the song to be played.
This completes the registration and/or chord progression
data setting for the song to be played.
Precautions when using the memory card
1. The memory card includes electronic components such
as ICs and should never be dropped or hit.
2. Do not touch the connector directly (with a pin or other
pointed tool, for example).
. Never try to disassemble the memory card.
. Do not subject the memory card to extreme temperatures
or humidity.
. Never expose to or discard in fire.
. Always store in the case when not in use.
© Ifthe memory card’s battery runs out, the stored contents
will be cleared and new contents cannot be stored.
If the battery runs out, please consult with your local
dealer. There is a charge for having the battery replaced.
Atnormaltemperatures, the life of a new battery is about 3
years.
® Note that in the process of replacing the battery, the
stored contents of the memory card are cleared. To
preserve the contents of amemory card, first make a copy
(in the piano’s internal memory or in another memory
card) before the battery is consumed. The battery can
then be removed and replaced with a new one.
&
oo
17
™@ The memory card allows storage of your performance
in either the PS mode or the FSC mode.
@ To perform the stored contents, be sure to use the
mode in which they were stored.
* When the other mode is used, either the stored
contents cannot be performed or the digital piano
may not operate properly.
When the digital piano does not operate properly:
1. Press the FSC buiton to turn it on.
2. Press the INITIAL key.
TH-—-OzZzmM