Technics SX-PR100 - Page 20

Phenomenon Remedy
When many keys are pressed at the When the AUTO PLAY CHORD is off, the maximum number of notes which can
same time, not all of them sound. sound simultaneously from the combined right and left keyboards is 12.
When the AUTO PLAY CHORD is on, the maximum is 8 notes.
Sustain does not work, even when the Sustain is set separately for the right and left sections. Turn the SUSTAIN
sustain pedal is pressed. PEDAL button on for either or both parts.
The rhythm does not start. eWhen a PLAY SEQUENCER buiton is on and a song without any rhythm is
stored, the rhythm does not start.
When the clock mode is set to MIDI CLOCK, the rhythm does not start if no
MIDI clock signal is received from another instrument.
When using only the piano, return the clock mode to the internal clock, for
example by turning off the POWER once.
The rhythm (DRUMS), ACCOMP or BASS There are BALANCE buttons for each part; when the BALANCE indicator is off,
does not sound. no sound is produced for that part. Push the A button.
Nothing is stored in the PROGRAM Selections must be made within 5 seconds after the RECORD button is
CHORD COMPUTER or PLAY SEQUENCER. | pressed. After 5 seconds the RECORD button turns off and no further storage
is possible.
Nothing is stored in the PROGRAM When storing chords, press a measure key ( K—=4N , Fi , FHH ) while
CHORD COMPUTER. holding down the chord. Be sure that the chord is not released until after the
measure key is pressed.
When playing back the PROGRAM
CHORD COMPUTER, the accompaniment
is not performed.
When the AUTO PLAY CHORD is off, the BASS and ACCOMP do not sound; only
the rhythm changes are performed. To play back the accompaniment, select
an AUTO PLAY CHORD mode (BASIC or ADVANCED).
The RECORD and PLAY SEQUENCER
indicators are flashing slowly, but
storage is not performed.
*Storage is not possible when the FSC button is on. Turn it off before storing.
elf another PLAY SEQUENCER indicator is lit, press the START/STOP button for
automatic performance of the stored part. Another part can then be stored.
When playing back the PLAY
SEQUENCER, a fast rhythm tempo
becomes slower.
This may happen when an extremely large number of notes are programmed
to be played at one time. Slow down the tempo, or decrease the number of
notes to be played at one time.
When the operation to play back from When performing the playback operation from a memory card, the piano’s
the optional memory card is performed, internal memory changes to that stored in the memory card. To preserve a
the contents of the piano’s internal song in the piano’s memory, store it in a memory card.
memory are erased.
Noise froma radio or TV can be heard. This sometimes occurs when electrical equipment such as a radio or TV is
used near the piano. Try moving such electrical equipment further away from
the piano.
The cabinet becomes warm during use. The piano has a built-in power source that heats the cabinet to some degree.
This is not an indication of trouble.
19