PartIV
Creatingrhythmpatterns
II. BASSpart
1. Pressthe BASSbutton to turn it on.
,i/
-.8I\SS OACCOMP1/0ACCOMP2 OACCOMPJ OORUMS
/ I" CHORD
O<IJGJCDCD
. The BASS indicator flashes.
2. Select the desired BASS sound from the
SOUND SELECT section.
3. Play two measures of the BASS pattern on the
keyboard.
~
. Record the performance in C major for correct
chord progressions during playback.
. The BASS pattern can be played on the entire
keyboard.
. Since the BASS part is monophonic, only one
note can be played at a time.
Here is what you play:
BASS part
. If you make an error in playing, you may press
the COMPOSER CLEAR button to erase the
entire BASS part.
III.ACCOMPpart
1. Press one of the ACCOMP buttons to turn it
on.
OBASS OACCOMP 1/ OACCOMP2 OACCOMPJ OORUMS
CHORD
GJICD IT) (DICD
. ,
0
. The indicator flashes.
2. Select the desired ACCOMP sound from the
SOUND SELECT section.
3. Play two measures of the ACCOMP pattern on
the keyboard.
~
. Record the performance in C major for correct
chord progressions during playback.
. Up to 4 notes can sound simultaneously on
each ACCOMP part..
Here is what you play:
ACCOMP part ~ ! I -= -=
: i : ~ ~ r I
1
I
. You can store the other two ACCOMP parts in
the same manner.
. If you make an error in playing, you may press
the COMPOSER CLEAR button to erase the
entire ACCOMP part which is currently being
recorded.
29
To Next Page
