20
Storage is not possible.
. The remaining storage capacity of the SEQUENCER memory
is O. Use the TRACK CLEAR or SONG CLEAR function to
erase the memory. (Refer to Vol. 2, page 25.)
. The MIDI EXT SEQ MODE is set to on. Set it to off. (Refer to
Vol. 2, page 47.)
Multi-track storage is not possible.
. The playback track has been selected, but the START/STOP
a: button has not been pressed. A flashing track indicator shows
w
the track which is ready for recording, and a lit track indicator
CJ
Z
shows a track which is ready for playback. To record one track
w
:;)
while
listening
to
another (playback) track,
press
the
a
w
START/STOP button to begin playback. (Refer to Vol. 2, page
rn
23.)
A previously stored song is played back.
. The tracks of a song which was previously stored have not
been cleared. Use the TRACK CLEAR or SONG CLEAR
function to erase the memory before recording a new song.
(Refer to Vol. 2, page 25.)
Storage is not possible.
. The remaining storage capacity of the COMPOSER memory
is O. Erase a COMPOSER number button in the RHYTHM
SELECT section in which a pattern is stored. (Refer to Vol. 2,
page 26.)
The playback timing of.lhe rhythm pattern is different from
. The QUANTIZE function was on when the pattern was
the timing with which it was stored.
recorded. (The default setting is" 1 6 ".) Set the QUANTIZE
a:
function to " 0 F F n. (Refer to Vol. 2, page 27.)
w
rn
Setting the time signature is not possible.
. The time signature cannot be changed for a pattern which is
0
currently stored in the COMPOSER. When storing in the COM-
:E
0
POSER and" ALL" appears on the display, press the
CJ
COMPOSER CLEAR button to erase the previously stored
rhythm pattern. (Refer to Vol. 2, page 26.)
When editing a preset rhythm, the drums sound is not
. Some of the drums sounds of preset rhythm patterns cannot
erased even when the PERC ERASE button is pressed.
be erased. Follow the COMPOSER CLEAR procedure. (Refer
to Vol. 2, page 26.)
0'
The Digital Disk Recorder produces a noise during record-
. This occurs when the Digital Disk Recorder is reading a disk.
... It)
ing or playback.
It does not indicate a problem.
III N
'0 a:
When the operation to load from a memory disk is per-
. When performing the load operation from a memory disk, the
...
0 :>
formed, the contents of the SEQUENCER are erased.
SEQUENCER memory changes to that of the data loaded from
(,) 0
III It)
the memory disk. If you wish to preserve a song which is stored
a: a:
.J1t.
in the SEQUENCER memory, save it in a memory disk before
.!! ...
Q 0
performing the load procedure. (Refer to Vol. 2, page 33.)
-
iii -
- III
- c
.21 0
Q 'i
.2.
Noise from a radio or TV can be heard. . This sometimes occurs when electrical equipment such as a
radio or TV is used near the piano. Try moving such electrical
equipment further away from the piano.
...
. The sound may be coming from a nearby broadcast station or
III
s:.
amateur radio station. Ifthe sound is bothersome, consult your
0
dealer or servicenter.
The cabinet becomes warm during use.
. This piano has a built-in power source that heats the cabinet
to some degree. This is not an indication of trouble.
To Next Page
Loading...
Need help?
General
