Technics SX-PX222/M

Seiting the functions
You can set various functions, for example, the type of tuning, or how the sound is produced when the keys
are pressed very slowly.
Settings which can be adjusted
| Function | on (when indicator is lit) off (when indicator is not lit)
Standard acoustic piano tuning, in which the | Standard equal temperament.
lower pitches are tuned slightly lower and
ARO TUNING the higher pitches are tuned slightly higher
(default setting).
No sound is produced when a key is played| Sound is produced regardless of how | softly
extremely softly (default setting). the keys are pressed.
The soft padal works as a sostenuto pedal. | The soft pedal works as a normai soft pedal
e For the PIPE ORGAN sound, the tones | (default setting).
continue to sound for as long as the pedal
is depressed.
Procedure
While pressing the MODE SET button, turn the MODE
desired function on or off by pressing the relevant SET
button.
« When changing the settings, the panel buttons
function as shown in the illustrations.
SOUND TOUCH SENSITIVITY
GRAND тиан Е ЕРЮ? HARPSI ORGAN
000000
ES
PIANO TUNNG "E
MINIMUM RANGE
Bi Initialization
If the INITIAL key on the keyboard (see page 19) is
pressed while the MODE SET button is depressed, « While the MODE SET button is depressed, the
ail settings return to their default status. keyboard keys do not produce sound.
« The TRANSPOSE indicators will flash at this time. e When the MODE SET button is pressed, the
e Note that when you perform the initialisation MIDI CHANNEL number (refer to page 16) is
procedure, the tracks which have been shown on the display.
memorized by the SEQUENCER will also be
cleared.
15