Technics SX-PX222/M

Transmitting PROGRAM CHANGE numbers
This piano can be used to transmit desired PROGRAM
CHANGE numbers to the connected instrument.
While pressing the MODE SET button, using the num-
bers on the keyboard illustration below for reference,
press a black key to specify the BANK and a white
key to specify the NUMBER. (Refer to the PROGRAM
CHANGE number table.)
INITIAL
e PROGRAM CHANGE numbers are transmitted by
combining a BANK and NUMBER to specify the
desired PROGRAM CHANGE number 0-127.
e The selected PROGRAM CHANGE number is
shown on the display.
e You can also use the SOUND buttons to specify
the PROGRAM CHANGE number, beginning with
0 as they are lined up from left to right.
If two buttons are pressed together, the one which
was pressed first will take precedence.
PROGRAM CHANGE number table
Cu
ЕЗ
E
>
Middle C
ee Ue __кэ› е E >=
Bra
bassa
'
i
i
;
А
'
21 24 28 36 48 60 72 BA 96 103 108
|___ MIDI note number
19