Technics SX-PX228B

—
—
o
а Record TRACK 1.
.Select the sound and set the DIGITAL EF-
FECT to on or off.
You can also use the LEFT SOUND sound.
. Press the RECORD button to turn it on.
SEQUENCER
srvsroe (RECURS) mk: «TRACK?
ius
The TRACK 1 and 2 indicators flash rapidly.
The tempo setting wil! appear on the display.
. Press the TRACK 1 button.
The TRACK 2 indicator goes out and the
TRACK 1 indicator flashes slowly.
Record TRACK 2.
.Select the sound and set the DIGITAL EF-
FECT to on or off.
You can also use the LEFT SOUND sound.
. Confirm that the TRACK 1 indicator is lit.
If it is not lit, press the TRACK 1 button to turn
it on.
. Press the RECORD button to turn it on.
SEQUENCER
ETARTSTOP тұсу:
HOC
The TRACK 2 indicator flashes rapidly.
4. Press the TRACK 2 button.
Ај
The TRACK 2 indicator flashes slowly.
14
4.Play the TRACK 1 part.
Recording starts when you begin to play the
keyboard.
Recording will also begin if the START/STOP
button is pressed. In this case recording
begins after a one-measure count.
.When you have completed recording the
TRACK 1 part, press the RECORD button to
turn it off.
9
Recording will also stop if the START/STOP
button is pressed.
The indicator for the recorded track changes
from flashing to the lit condition.
. Play the TRACK 2 part.
Because the part already recorded in TRACK
1 is played back automatically, you can play
the TRACK 2 part in time with it.
Recording will also begin if the START/STOP
button is pressed. In this case recording
begins after a one-measure count.
.When you have completed recording the
TRACK 2 part, press the RECORD button to
turn it off.
н