Technics SX-PX228B User Manual

BRILLIANCE
The BRILLIANCE allows you to select the
brightness of the sound from 5 settings.
if either of the buttons is pressed once, the
current setting value will appear on the
display, and it can then be changed.
Pressing the BRIGHT button increases the
brightness; when the MELLOW button is
pressed, the sound becomes mellower. During
setting the brightness is shown on the display
(-2 to 2).
• Press both buttons at the same time to
return the brightness to O.
* A short time after the setting is completed,
the display will return to the turned-off
condition.
e If the BRILLIANCE has been set to a
number other than 0, one of the indicators
remains lit.
Display
The display shows a variety of
different setting values, and also
the SEQUENCER and
METRONOME tempos.
• During normal playing, it is
turned off.
Sustain pedal
The right pedal allows you to use sustain.
When a key is released while this pedal is
depressed, the sound is sustained so that it
lingers and slowly fades out.
The right pedal is an 8-stage pedal, and
the length of the sustain is controlled by
the degree to which the pedal is depressed.
String resonance is added to some
sounds. (Refer to page 11.)
TOUCH SENSITIVITY
The keyboard touch (Touch Response) can be
changed to match your type of playing.
e Choose from LIGHT, NORMAL and HEAVY.
SEQUENCER
START/STOP
o
SEQUENCER
Record your performance and have it
automatically played back. (Refer to page 13.)
TRANSPOSE
TOUCH SENSITIVITY
Setting the effects for each sound
The DIGITAL EFFECT, BRILLIANCE and
DIGITAL REVERB are stored independently
for each sound. When a SOUND button is
pressed, the effect settings for the selected
sound are recalled.

Technics SX-PX228B Specifications

General

Brand	Technics
Model	SX-PX228B
Category	Amplifier
Language	English