Technics SX-PX552

Record TRACK 1.
.Select the sound and set the DIGITAL EF-
FECT to on or off.
.Press the RECORD button to turn it on.
SEQUENCER
sranysror Сасово] такка TRACK
WOU
The TRACK 1 and 2 indicators flash rapidly.
The tempo setting will appear on the display.
.Press the TRACK 1 button.
TRACK 1
X
The TRACK 2 indicator goes out and the
TRACK 1 indicator flashes slowly.
m Record TRACK 2.
анд.
„бе!есї the sound and set the DIGITAL ЕЕ-
FECT to on or off.
. Confirm that the TRACK 1 indicator is lit.
If it is not lit, press the TRACK 1 button to turn
it on.
3. Press the RECORD button to turn it on.
SEQUENCER
STARTISTOP DECORE 1 TRACK2
o “От bd o
н
è
The TRACK 2 indicator flashes rapidly.
4.Press the TRACK 2 button.
ў |
The TRACK 2 indicator flashes slowly.
16
. Play the TRACK 1 part.
Recording starts when you begin to play the
keyboard.
Recording will also begin if the START/STOP
button is pressed. In this case recording
begins after a one-measure count.
.When you have completed recording the
TRACK 1 part, press the RECORD button to
turn it off.
Recording will also stop if the START/STOP
button is pressed.
The indicator for the recorded track changes
from flashing to the lit condition.
. Play the TRACK 2 part.
Because the part already recorded in TRACK
1 is played back automatically, you can play
the TRACK 2 part in time with it.
Recording will also begin if the START/STOP
button is pressed. In this case recording
begins after a one-measure count.
.When you have completed recording the
TRACK 2 part, press the RECORD button to
turn it off.
-