Technifor XF510Sr - User Manual

www.technifor.com
Technifor reserves all rights to modify its products.
This document is non contractual.
OPERATING AND MAINTENANCE MANUAL
XF510Cr/Sr/Dr
INTEGRABLE MARKING HEAD
NUMERICALLY CONTROLLED
MARKING BY SCRIBING
Ref. DCD01/3074 - XF510Cr-Sr-Dr_en_C - Last updated: 03/2011

Technifor XF510Sr Specifications

General

Brand	Technifor
Model	XF510Sr
Category	Controller
Language	English

Summary

Introduction to Technifor Marking Systems

Power and Air Supply Specifications

Details on power supply, consumption, and compressed air requirements for operation.

Workstation Safety Instructions

Essential warnings and guidelines for the safe operation and use of the marking equipment.

Operating Instructions for the Machine

Technical Specifications and Features

Details on stylus compatibility, available fonts, and key physical characteristics.

Installation and Setup Procedures

Marking Head Mounting Procedure

Step-by-step instructions for securely attaching the marking head to a suitable support.

Mounting Plate Force and Torque Data

Information on forces and couplings exerted on the mounting plate by the marking head.

Forces Exerted on the Part to Mark

Compressed Air Supply Connection

Marking Head to CCU Connection

Stylus Mounting and Height Adjustment

Procedures for mounting the stylus and adjusting its height for optimal marking performance.

Preventive Maintenance Schedule

Weekly Preventive Maintenance Tasks

Monthly Preventive Maintenance Tasks

Annual Servicing Procedure

Details and scope of the comprehensive annual servicing recommended by the manufacturer.

Wearing Parts and Spare Parts Catalog

Wearing Parts: Styli and Repair Kits

Spare Parts Catalog

Machine Noise Emission Assessment