Technifor XF510Cr User Manual

www.technifor.com
Technifor reserves all rights to modify its products.
This document is non contractual.
OPERATING AND MAINTENANCE MANUAL
XF510Cr/Sr/Dr
INTEGRABLE MARKING HEAD
NUMERICALLY CONTROLLED
MARKING BY SCRIBING
Ref. DCD01/3074 - XF510Cr-Sr-Dr_en_C - Last updated: 03/2011

Technifor XF510Cr Specifications

General

Brand	Technifor
Model	XF510Cr
Category	Controller
Language	English

Summary

Introduction to Technifor XF510 Marking Systems

Unpacking and System Contents

Details on how to unpack the marking machine and identify its included components.

Equipment Identification and Specifications

Information on identifying the marking head and control unit, plus power and air specs.

Regulatory Compliance and Standards

Overview of CE marking, European directives, and applicable industry norms.

Work Station Safety Guidelines and Limitations

Essential safety instructions, operational limits, and handling precautions for the marking system.

Operating Instructions for XF510Cr/Sr/Dr Marking System

Machine Description and Functionality

Overview of the XF510Cr/Sr/Dr marking machine, its components, and working principles.

Technical and Physical Specifications

Detailed technical data, including stylus compatibility, dimensions, weight, and marking area.

Dimensional Drawings and Mounting Points

Illustrations showing the dimensions and mounting interfaces for XF510Cr, XF510Sr, and XF510Dr models.

Available Accessories and Kits

List of optional accessories and kits to enhance the marking system's capabilities.

Installation Guide for XF510Cr/Sr/Dr Marking Head

Mounting the Marking Head

Procedure for attaching the marking head to a support using bolts, including torque specs.

Mechanical Forces and Torques Analysis

Details on forces and couplings exerted on mounting plates and parts for different styli.

Integration and Operating Positions

Guidance on various mounting orientations and their implications for marking.

Coordinate System and Compressed Air Supply

Explanation of the coordinate system and connection requirements for compressed air.

Stylus Mounting, Adjustment, and Connection

Steps for mounting the stylus, adjusting its height, and connecting the head to the CCU.

Preventive Maintenance Schedule for XF510 Marking System

Weekly Maintenance Tasks

Recommended checks and cleaning procedures for the air filter and system.

Monthly Maintenance Tasks

Detailed procedures for monthly inspection and cleaning of the stylus and its components.

Annual Servicing and Verification

Description of the yearly comprehensive service performed by Technifor.

Wearing Parts and Spare Parts for XF510 Series

Standard Styli, Points, and Repair Kits

List of standard scribing styli, individual points, and repair kits available for replacement.

Spare Parts Catalog for XF510 Models

Catalog of specific spare parts including detector units, solenoid valves, and filters for XF510 series.

Machine Noise Emission and Testing Procedures

Noise Measurement Methodology and Conditions

Details on the test code, equipment, material, microphone positions, and test conditions.

Measured Noise Emission Levels and Safety

Presentation of measured noise levels (LAeq, Lpc) and recommendations for hearing protection.

Appendix: Technifor Group Contact Information

Global GravoTech Group Contact Directory

List of contact details for Technifor and GravoTech offices worldwide.