AOperating instructions for the machine
B
Ref. DCD01/3074 - XF510Cr-Sr-Dr_en_C
12/31
5. List of accessories available upon request
The accessories mentioned below are available upon request.
Height adjustment device
Protective boot
Mobile protective shutters
DataMatrix kit
Ref.: 52871
• The CHR 312 height adjustment system is used
to adjust the marking head height within a range
of +/- 22.5 mm (0.886 in).
• Positioned between the marking head and the
support to which the head is attached.
XF510Cr:
Ref.: 52879
XF510Sr:
Ref.: 52875
XF510Dr: Option not
available
• Used to protect a marking system installed in a
polluted environment (dust, oil...).
XF510Cr:
Ref.: 52880
XF510Sr:
Ref.: 52876
XF510Dr:
Ref.: 52881
• Protects the head from solid particles larger than
1 mm (0.039 in), and in certain conditions, from
spattering of liquid (N/A for stylus pointing up).
Ref.: 52877
• Used to manage different pressures between
scribing and marking of a DataMatrix code.
To Next Page
Loading...