To Next PageTo Next Page
Need help?Do you have a question about the Technify Motors Cessna 172 and is the answer not in the manual?
General| Cruise Speed | 124 knots (143 mph, 230 km/h) |
|---|---|
| Length | 27 ft 2 in (8.28 m) |
| Height | 8 ft 11 in (2.72 m) |
| Fuel Capacity | 56 gallons (212 liters) |
| Range | 696 nm (800 mi, 1, 287 km) |
| Wingspan | 36 ft 1 in (11.00 m) |
Specifies the engine's defined life limit and replacement conditions.
Lists mandatory maintenance actions for the engine.
Details time limits and inspection requirements for maintenance.
Outlines scheduled maintenance checks for propeller and engine groups.
Specifies the aircraft models covered by the manual.
Provides technical details about the engine manufacturer and model.
Describes exterior decals and their placement.
Describes interior decals and their placement.
Shows service points for engine installation.
Provides instructions for filling and draining fuel tanks.
Provides data on standard and special torque values and sealants.
Lists standard tightening torques for set screws and dash connectors.
Describes the engine's heat exchanger and coolant system.
Details possible electrical system variants and their components.
Lists precautions for testing the electrical system.
Describes the fuel system's components and operation.
Illustrates fuel system diagrams for various Cessna models.
Details the light panel functions and descriptions.
Shows engine data monitoring via CED 125 and its parameter ranges.
Describes the engine's vacuum pump and its function.
Details the engine's equipped propeller and maintenance references.
Explains the propeller control system using gearbox oil.
Describes the engine's type, displacement, power, and principle.
Describes the engine mount construction and troubleshooting.
Describes the engine as a direct Diesel injection system with common-rail technology.
States no ignition system is necessary due to Diesel principle.
Describes the engine's fluid-cooling system and its components.
Refers to Chapter 31 for indication instruments.
Describes the exhaust system including muffler and turbocharger.
Details the engine oil system, its components, and installation variations.
Relates oil parameters indicated on the CED 125.
Describes the engine starter and its variants.
States wiring diagrams depend on the electrical system variant.
Lists specific tooling required for maintenance actions.
Lists related documents for the manual.
Explains how to identify engines, engine mounts, and AED/CED components.
Explains symbols and warning signs used in the manual.
Specifies the manual's applicability to specific engine serial numbers and aircraft types.
Lists abbreviations used throughout the manual.
Defines personnel qualifications for performing manual tasks.
Refers to Chapter 04 for engine service life information.
Provides conversion factors for various units of measurement.
