Techniglass The Grinder - Safety Precautions; General Safety Guidelines; Water Management and Equipment Handling

•
Always use eye protection while
operating this glass grinder.
•
Use only a properly grounded,
three-prong outlet
•
Water from reservoir must not reach
electrical outlet
•
Power off THE GRINDER when
not in use
•
Before grinding, ensure the water
reservoir is adequately filled
•
DO NOT OVERFILL THE
WATER RESERVOIR
•
Always install Water Shaft Seal on
shaft when using upper platform
•
When removing LumiShield
®
Arm,
always cover slot with LumiShield
Mount Cap
SAFETY PRECAUTIONS