6
! Be sure that the cables can’t be rubbed and overheated. Is the isolation damaged, change the cable
immediately!
Mounting and frame:
Take care on following points when mounting the seeder:
! If the frame is made by your own it must have enough carrying capacity.
! During driving strong vibrations are coming to the seeder and frame Frame and connections must
withstand this vibrations; Check the connections, if they are tight, before and after every operation;
Check the cross beams and frame if there are cracks or damages before and after every operation!
! Be sure that there is enough space around the seeder to do adjusting and workings without danger!
! The safety steps for filling the hopper must be done according to DIN EN 14018. (available on request)
Operation:
· The seeder is not for aggressive seeding material developed (f.e. mineral fertilizer)
· To bring out rape, clover, mustard, slug pellets, phacelia, lucerne, rye, oat, peas, micro granulate, wheat,
grass seed, ...
· To mount on striegle, disc harrow, grubber, roller, seed combinations, grass harrow, harvest machines,
combine, ...
· The seeder is developed for agricultural use to bring out seed and not aggressive mineral granulate. For
every other use expires the guarantee and product liability!
Hydraulic system (just for seeders with hydraulic system!)
The hydraulic system on the fan wheel is made for max. 50lit/min and the motor max. 25lit/min. Don´t
exceed this amount otherwise the seeder can be damaged. No warranty!!
Warranty:
See warranty request in attachment!
Product liability:
The product liability is just valid when the machine is used appropriate. Is the machine not correct
maintained and controlled (f.e.: regularly checking of spread pattern and functionality of all parts, ...) we
don´t take liability to the damages or accidents occurred because of that.
Page 5 of 26
To Next Page
Loading...