IDTV
20
PC Menu Operation (VGA)
PC Settings Menu
You can use your TV as a monitor for your personal computer by using a VGA cable. Sound from
your personal computer may also be played through the TV. This requires the audio output of the
personal computer to be connected to the Audio Input Socket (PC) connection on the TV.
1. Select the VGA/PC Source as described on page 12.
NOTE: The PC settings Menu will only be available if the VGA/PC Source is selected and a VGA
Cable is connected to the TV.
Choose from the following settings:
Auto Sync – The TV automatically confi gures itself.
Phase - Allows you to adjust delay time of phase in
order to reduce the noise of the picture.
Clock – Allows you to increase or decrease the clock.
H Position (Horizontal Position) – Allows you to
change the horizontal position of the picture.
V Position (Vertical Position) – Allows you to change
the vertical position of the picture.
Position Reset – Allows you to reset the position of the picture to the factory settings.
Tesco-Tecknika IDTV .indd Sec1:20Tesco-Tecknika IDTV .indd Sec1:20 07/07/2009 16:52:0107/07/2009 16:52:01
To Next Page
Loading...
Need help?
General
