PG 8
INSTALLATION INSTRUCTIONS
Attention
The installation of the pipes and electrical equipments should be done by professionals.
Electrical Requirements
Please look at the rating label to know the rating voltage and connect the dishwasher to the
appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse or circuit breaker
recommended and provide separate circuit serving only this appliance.
Electrical Shock Hazard
Disconnect electrical power before installing
dishwasher. Failure to do so could result in
death or electrical shock.
For personal safety:
Do not use an extension cord or an adapter plug with this
appliance.
Do not, under any circumstances, cut or remove the earthing
connection from the power cord.
About Power Connection
WARNING
Electrical Connection
Ensure the voltage and frequency of the power being corresponds to those on the rating plate.
Only insert the plug into an electrical socket which is earthed properly. If the electrical socket
to which the appliance must be connected is not appropriate for the plug, replace the socket,
rather than using a adaptors or the like as they could cause overheating and burns.
Ensure that proper erathing exists before use
To Next Page
Loading...
Need help?
General
