PG 35
If there is a malfunction, the dishwasher will display an error code. This following table shows
possible error codes and their causes.
WARNING:
• If overflow occurs, turn off the main water supply before calling a service.
• If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
• If there is an error code that cannot be solved, please request professional assistance.
ERROR CODES
Codes
Meanings
Possible Causes
Longer inlet time.
Malfunction of heating element.
Not reaching required
temperature.
Some element of dishwasher leaks.
Open circuit or break of distributary valve.
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
Failure of orientation
of distributary valve.
The Rapid light
flicker fleetly
The Rapid and
min light flicker
fleetly
90
The Glass light
flicker fleetly
The Eco, Glass
and
Rapid
light
flicker fleetly
To Next Page
Loading...
Need help?
General
