DE
EN
58 59
The blue power LED now lights up
constantly and a confirmation tone is
heard. A connection has been successfully
established.
> If you want to use another device
with the BLUSPEAKER TWS XL,
switch o the Bluetooth function
on the device you no longer
want, or press and hold the
Bluetooth buon until you hear
a confirmation tone and the LED
flashes blue.
> Then carry out the steps described
above with the new device.
If the pairing process is
not successful, switch the
BLUSPEAKER TWS XL o briefly
and then on again.
To Next Page
Loading...
