TechniSat BLUSPEAKER TWS XL

64 65
7.6.1 Activating TWS mode
> Switch the BLUSPEAKER TWS
XL ON.
> Activate TWS mode on both
BLUSPEAKER TWS XLs one aer
the other by briefly pressing the
Volume + and Volume - buons
simultaneously. The power LED
flashes blue.
> Now switch on the second
BLUSPEAKER TWS XL. This is in
pairing mode and now finds the
first BLUSPEAKER TWS XL. Aer
successful pairing, a signal tone
sounds from the master (le)
and TWS mode is active (LED
lights up green).
> Then connect a smartphone/tablet
to the le BLUSPEAKER (master)
via Bluetooth.