TechniSat DIGITRADIO 21 IR

51
DE
EN
The functions and buons to be pressed are shown in bold in this instruction
manual. Displays in [square brackets].
Some text (e.g. menu items, station information) may be too long to show on
the display. These will then be shown as running text shortly thereaer.
8 Initial set-up
When you switch on the DIGITRADIO 21 CD IR for the first time, the initial set-up
wizard is launched.
All seings can subsequently be changed at any time.
When carrying out the initial setup, follow the radio operating method for
selecting and seing in menus as described in Section 7.
> Select using your preferred operating language with the SCROLL/SELECT
knob and confirm your selection.
> Pay aention to the data protection information in the radio display and
confirm that you have read it.
> To start the initial setup wizard, select the [YES] field and confirm.
> In the next step you can select the time format. Select the seing you prefer
([12] or [24]) and confirm.
> You must then select the source (DAB+, FM or Internet) via which the
DIGITRADIO 21 IR obtains and updates the time and date.
If you have selected [Update from NET], the next step is to select the time
zone so that the time is displayed correctly, and whether daylight saving time
or standard time applies at the time of seing.
The radio then searches for available wireless networks.
> Select the WLAN network you recognise and then select the preferred
connection method.
[Press buon] Start WPS function (please refer to the procedure for
your router)
[PIN] Start WPS function with a PIN (please refer to the
procedure for your router)
[Skip WPS] Enter the network key manually (you only need to
enter it once)