TechniSat DIGITRADIO 231 OD

114
Aer the scan is complete, the first station is played back in alphanumeric order.
> Press the SCAN buon to carry out a full scan.
Alternatively:
> Open the main menu by pressing and holding the INFO/MENU buon.
> Use the TUNING/SKIP buons to select the menu item [Scan seings] and press
the SELECT buon.
> Then use the TUNING/SKIP buons to select the menu item [Full scan] and
press the SELECT buon.
> [Scanning...] appears on the display.
During the scan, a progress bar and the number of stations found are displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 6.3.2).