TechniSat DIGITRADIO 231 OD

122
9.3 Automatic station scan
> Press the SCAN buon to start the scan. Please note the scan seings in Section
9.5 when doing so.
> If a FM station with sucient signal strength is found, the scan stops and the
station is played.
If an RDS station is received, the station name, and possibly the radio text,
appear.
Please use the manual station scan for seing weaker stations.
9.4 Manual station scan
> By briefly pressing the TUNING/SKIP buons several times, the frequency can be
set in 0.05 MHz steps.
9.5 Scan seings
With this menu item you can set the sensitivity of the automatic scan.
> Open the main menu by pressing and holding the INFO/MENU buon.