TechniSat DIGITRADIO 231 OD - Page 131

131
DE
EN
FR
NL
PL
IT
12.2 Alarm
The alarm switches on the DIGITRADIO 231 OD at the set time. 2 alarm times can be
programmed. The description of how to programme Alarm 1 serves as an example.
The alarm function cannot be operated until the correct time has been set.
Depending on the configuration, this occurs automatically or will need to be set
manually. The time can either be updated manually or via DAB/FM. For more
information on this, see Section 13.1.
The alarm can only be configured in mains operation and the alarm also only
works in mains operation. If the device is in baery mode, first connect the mains
adapter.
12.2.1 Alarm configuration
> Open the main menu by pressing and holding the INFO/MENU buon.
> Select the menu item [Alarm] with the TUNING/SKIP buons and press the
SELECT buon.