TechniSat DIGITRADIO 231 OD - Page 134

134
12.2.2 Switching the alarm o aer it has gone o
> Press the On/Standby buon to switch o the alarm or wait until the
configured alarm duration has elapsed.
12.2.3 Deactivating the alarm
> If you want to deactivate the alarm, open the alarm configuration again and
select [Alarm] > [O].
Alternatively:
> If the DIGITRADIO 231 OD is in standby mode (mains operation), the alarms can
be switched on or o quickly by pressing the MODE buon. You will now be
taken directly to the alarm configuration.