TechniSat DIGITRADIO 231 OD - Page 135

135
DE
EN
FR
NL
PL
IT
13 System seings
All seings explained in this section apply equally to all operating modes.
13.1 Date and time seings
13.1.1 Manually seing the date/time
Depending on the seing for time updates (Section 13.1.2), the date and time may have
to be set manually.
> Open the main menu by pressing and holding the INFO/MENU buon.
> Use the TUNING/SKIP buons to select the menu item [System seings] >
[Date/Time] > [Date/Time seing] entry and press the SELECT buon.
> The first digits (day) of the date flash and can be changed using TUNING/SKIP.
Press the SELECT buon to apply the seing.
> The next date digits (month) then start to flash and can again be changed as
described above.
> Press SELECT aer each additional seing in order to go to the next seing.
> To set the time, proceed in the same way as described above.