TechniSat DIGITRADIO 231 OD - Page 141

141
DE
EN
FR
NL
PL
IT
13.4 Language
> Open the main menu by pressing and holding the INFO/MENU buon.
> Use the TUNING/SKIP buons to select the menu item [System seings] >
[Language] and press the SELECT buon.
> Use TUNING/SKIP to select one of the available languages and confirm the
selection by pressing SELECT.
> Press the INFO/MENU buon repeatedly to exit the seing.
13.5 Factory seings
If you change the location of the device, it is possible that the saved stations can no
longer be received. In this case you can reset the device to factory seings to delete all
the saved stations and then initiate a new scan.
> Open the main menu by pressing and holding the INFO/MENU buon.
> Use the TUNING/SKIP buons to select the menu item [System seings] >
[Factory seings] and press the SELECT buon.