TechniSat DIGITRADIO 52 CD

116
8.5 Scan seings
In this menu item it is possible to set the sensitivity of the scan.
> Hold the SELECT/MENU buon down again briefly. Use the < or > buons to
select the [Scan seings] item and press the SELECT/MENU buon.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations seing, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.
8.6 Audio seings
> Hold the SELECT/MENU buon down again briefly. Use the < or > buons to
select the [Audio seings] item and press the SELECT/MENU buon.
> Use < or > to select the [Stereo permied] or [Mono only] item to play back in
stereo or only in mono sound when the FM reception is weak.
> Confirm by pressing SELECT/MENU.