125
DE
EN
FR
NL
10.2 Playing/pausing from USB
> Press the MODE buon as oen as required until [USB] is shown on the display.
> In order to gain access to a USB memory it needs first to be connected to the
radio by inserting it in the DC-OUT 5 V, 1 A port.
Do not start the operation until the content of the USB memory has been read
completely, to ensure that all the required information has been read. This
process may take a while, particularly with large memories having many files /
folders.
> By pressing the Play/Pause buon you can start / pause / continue the playback
(the playing time flashes on the display when paused).
Always stop the playback prior to removing the USB.
If there is no playback, the DIGITRADIO 52 CD switches to standby aer approx.
15 minutes.
To Next Page
Loading...
