70
17.2 Alarm
> Press the MENU buon and then select [Main Menu > Alarm].
Alternatively:
> Press the Alarm 1 or Alarm 2 buon to jump straight to alarm configuration.
17.2.1 Seing the alarm time
The alarm function cannot be operated until the correct time has been set.
Depending on the configuration, this either happens automatically or will
need to be set manually. The time can either be set manually or automatically
using DAB+/FM or updated using the Internet. For more information on this,
see Section 18.3.
> Select an alarm time memory Alarm 1 or Alarm 2 using the or buons
and confirm with OK.
Alternatively:
> Press the Alarm 1 or Alarm 2 buon to jump straight to alarm configuration.
> Then go through all the points one aer the other. Confirm each entry with
the OK buon.
Repeating
> You can choose between Daily (every day of the week), Once, Weekdays
(Mon - Fri) and Weekends (Sat and Sun). Press the OK buon to apply the
seing.
Time
> Here you can enter the alarm time and date (if required).
Using the / buons, first select the hours and press the OK buon to
save. Then enter the minutes. Accept this too by pressing the OK buon.
If Repeat > [Once] has been selected, you must also enter the date as well
as the time.
Mode
> You then enter the source. The available options are BUZZER, Internet Radio,
DAB+ or FM. Press the OK buon to accept the seing.
Station
> If you have selected Internet Radio, DAB+ or FM, you can then enter
whether or not you want to be woken up by the last station listened to or
by one from your Favourites list.
Volume
> Use the / buons to select the volume with which you wish to be woken
up.
To Next Page
Loading...
Need help?
General