TechniSat DIGITRADIO 586 User Manual

71
DE
EN
FR
NL
Saving
> Press the OK buon to save the alarm.
The alarm is active as soon as you have set the alarm repeat to Daily, Once,
Weekend, or Workdays. The status bar shows an alarm symbol with the
corresponding number of the active alarm.
17.2.2 Switching the alarm o aer it has gone o
> Press the On/Standby buon to turn o the alarm.
> Press the SNOOZE buon to switch on the snooze function. By repeatedly
pressing SNOOZE you can also select the length of the pause from 5, 10, 15
or 30 minutes.
The alarm symbol appears on the display again if the alarm repeat is set to
Daily, Weekend or Workdays.
17.2.3 Switching o the alarm
> In the menu select the relevant alarm under > Repeat: O.
18 System seings
All seings explained in this section apply equally to all sources.
> Open the menu and use the  /  buons to select >
[Main menu > System Seings]. Press the OK buon to open the system
seings.
18.1 Equaliser
> Press the MENU buon and then select [Main Menu > System Seings >
Equaliser].
Here you can carry out dierent equaliser seings to adapt the sound to your taste.
You can choose from:
Normal, Jazz, Rock, Soundtrack, Classic, Pop, News, and My EQ.
> Use the / buons to select the equaliser seings and press the OK
buon to accept the seing.
18.1.1 My EQ seing
> Open the seing [System Seings > Equaliser > My EQ seings].
> Select [Bass] to increase/decrease the bass or [Treble] to increase/decrease
the treble.

TechniSat DIGITRADIO 586 Specifications

General

Brand	TechniSat
Model	DIGITRADIO 586
Category	Radio
Language	English