TechniSat DIGITRADIO Car 2 User Manual

64
3. Turn and push the selection knob to indicate how the DIGITRADIO Car 2 is to be connected in the car.
> If you have connected the reception unit to the vehicle radio with the audio cable, select [LINE-OUT]. You can then
stipulate the amplification of the audio signal (normal or low).
> If you are connecting the reception unit via FM radio, select [FM TRANSF.] and select an FM frequency.
Make sure that the frequency you have selected is not being used by a radio station.
> Set the audio system in your vehicle to the same FM frequency as the one on the DIGITRADIO Car 2. Save it as one of
your favourites in your audio system to be able to find the FM frequency again quickly.
> Aer you have decided on a connection method for the DIGITRADIO Car 2, it will start to search for digital radio stations.
You will be able to listen to digital radio aer the automatic station scan is complete.

TechniSat DIGITRADIO Car 2 Specifications

General

Dimmable	Yes
Projection	No
Product color	Black
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, FRE, ITA, NOR
Radio type	Car
Tuner type	Digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	20
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Apple docking compatibility	Not supported
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1
Display type	LCD
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Compatible memory cards	MicroSD (TransFlash)
Battery voltage	3.7 V
Battery capacity	800 mAh
Compatible battery sizes	AAA
Number of batteries supported	2
Power source	Cigar lighter
Package depth	63 mm
Package width	157 mm
Package height	308 mm
Package weight	550 g
RMS rated power	- W

Weight and Dimensions

Depth	31 mm
Width	76 mm
Height	60 mm
Weight	64 g