70
Press NAV/MENU to show your call log. Then select [TEL. BOOK] and then [ACCEPTED], [DIALLED] or [MISSED] to show
the dialled, accepted and missed calls.
Accepting or rejecting a call
> Press to accept an incoming call. To end the call, press .
> Press to reject an incoming call.
Using a smartphone voice assistant
If you have connected the DIGITRADIO Car 2 to a smartphone with a voice assistant by Bluetooth, you can use the voice
assistant on this device.
1. Hold down.
2. Start the voice assistant on your smartphone by asking a question.
Press or the On/O/BACK buon to end the voice assistant on your smartphone.
6 Seings
6.1 Changing between cable connection and FM transfer
You can decide for yourself how your DIGITRADIO Car 2 is to be connected to your vehicle’s audio system.
1. Press NAV/MENU.
2. Turn and press the selection knob to select [SETTINGS > AUDIO > OUT].
3. Turn and push the selection knob to indicate how the reception unit is to be connected in the vehicle.
If you have connected the reception unit with a cable, select [LINE OUT]. Turn and press the selection knob to select
amplification to [LOW] or [NORMAL]. Select [LOW] if the sound is distorted.