> Briey press the Pause / Play button while listening to the call waiting tone .
Accept a second call and put the ongoing call on hold
> Press and hold the Pause / Play button for 2 seconds while you hear the call wait-
ing tone.
Rejecting a call and another to continue the ongoing call
> Press 2 times the Pause / Play button to reject an incoming call .
End the current call and continue the call on hold
> Briey press the Pause / Play button.
Terminate the call on hold and continue the waiting call
> Press 2 times the pause / play button.
Switch between two calls
> Press and hold the Pause / Play button for 2 seconds.
Transfer music3.5.
Via Bluetooth3.5.1.
To play music on your StereoManBT, connect the device rst, as described in Section
3.2 with your desired audio source.
During playback, the following functions are available:
Increase or decrease the volume
> Use the Volume Up and Down button to change the volume.
Skip to the next or previous tracks
> Press the button to jump to the front or back to the next or previous track.
Forward or rewind within the title
> To rewind within a track forward or each key pressed for more Next or Back .
Play pause and continued
> To pause or resume playing a song , press each briey pause / play button
With line-in jack3.5.2.
As an alternative to a connection via Bluetooth you can connect the StereoManBT via
a cable to your audio source. Use to please the included audio cable.
> Connect the Line In jack (Figure point 2 ) with the corresponding connection of your
audio source .
If the StereoManBT is connected via the cable, any existing Bluetooth con-
nections will eventually be ended.
Any additional value added features such as described under 3.5.1 are not
available here.
Restore factory settings3.6.
The StereoManBT can be reset to factory settings.
> Press and hold the multifunction key and the Pause / Play button at the same time
To Next Page
Loading...