41
DE
EN
FR
IT
NL
PL
Problem Possible cause Solution
The charging light
does not come on
when the device is
connected
to the mains.
The mains adapter
(A) is not inserted
correctly into the
socket or the DC
connector is not
inserted correctly into
the baery connection
socket (F).
Correct the positioning.
The socket is
defective.
Try using a dierent
socket.
Strange smell The device is being
used for the first time.
An unusual smell is
normal the first time
the device is used.
It will disappear over
time.
11 Technical data
Device
Model TECHNIMAX AS1
Voltage supply 28.8 V, 2,500 mAh
Power rating 300 W
Baery charging time Up to 360 minutes
Operating time Up to 60 mins (when power levels and
accessories are used)
HEPA filter H13
Technical data for supplied power cable
Manufacturer TechniSat Digital GmbH, Julius-Saxler-
Strasse 3, D-54550 Daun, Germany
Model number TYGSDC3600500
Input voltage AC 100 - 240 V
Input AC frequency 50/60 Hz
Output voltage DC 36.0 V
Output current 0.5 A
Output power rating 18.0 W
Average eciency during operation 85 %
Eciency under low load (10 %) 73.5 %
Power consumption under zero load 0.06 W