TechniSat TECHNIRADIO 3 User Manual

110
The Tune> buon increases the value, the <Tune buon reduces the value.
> Press Select to apply the seing.
> The next time digits (minutes) start to flash and can again be changed as
described above.
> Press the Select buon aer every additional seing in order to go to the next
seing.
> To set the date, proceed in the same way as described above.
> Aer all seings have been done and the Select buon pressed, [Time saved]
appears on the display.
9.3.2 Automatic time updating
In this submenu, you can determine whether the time update should be done
automatically via DAB+ or FM, or whether you wish to enter it manually (section 9.3.1).
> In the sub-menu [System], use the <Tune or Tune> buons to select the [Time]
entry, and then press the Select buon.
> Using <Tune or Tune>, select the [Autom. Update] item and press Select.
> Select the following options using the <Tune or Tune> and Select buons:

TechniSat TECHNIRADIO 3 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	10
RMS rated power	1 W
Display type	LCD
Headphone connectivity	3.5 mm
Coloration	Image
Thermometer	No
MP3 playback	-
Product color	Red
Volume control	Buttons
Battery type	AA
Number of batteries supported	4
Power source	AC/Battery
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Width	- mm