TechniSat TECHNIRADIO 3

109
DE
EN
DA
> In the sub-menu [System], use the <Tune or Tune> buons to select the
[Alarm] entry, and then press the Select buon.
> Use <Tune or Tune> to select the alarm that you wish to switch on / o and
then press the Select buon again.
[Seing Alarm 1] appears on the display.
> Use the <Tune, Tune> buons to select [Alarm on] or [Alarm o] and press the
Select buon to apply the seing.
9.3 Date and time seings
9.3.1 Manually seing the date / time
Depending on the seing for time updates (Section 9.3.2), the date and time may have
to be set manually.
> In the sub-menu [System], use the <Tune or Tune> buons to select the [Time]
entry, and then press the Select buon.
> Using <Tune or Tune>, select the [Set time / date] item and press Select.
> The first time digits (hours) flash and can be changed using the <Tune or Tune>
buons.