104
11.4 Factory seings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
Factory Seings to delete all the saved stations and then launch a new scan.
> Select the entry [Factory seings] in the [System] sub-menu and press
Snooze/Select.
> Use the Next/Prev. buons to select the [Yes] entry to reset to the factory
seings and press Snooze/Select.
All previously stored stations and seings will now be deleted. The device is
now in the same status as when delivered.
> The display will show [Restart ...] and the device will start with the language
selection [Language].
To Next Page
Loading...
