84
8.2.1 Performing a full scan
The automatic scan Full Scan scans all DAB+ Band III stations and thereby
finds all stations being broadcast within the reception range.
Aer the scan is complete, the first station is played back in alphanumeric
order.
> Open Menu > [Full Scan] and press the Snooze/Select buon.
>
[Scanning...] appears on the display.
During the scan a progress bar and the number of stations found is displayed.
If no station is detected, check the telescopic antenna alignment and, if
required, change the installation location (Section 6.3.1).
To Next Page
Loading...
