Display mode
> Use the up/down arrow keys to select your preferred display mode and confirm by
pressing the OK button.
The values preset by the selected displayed mode can be adjusted as you want after
AutoInstall, in the main menu under Settings > Picture settings.
When selecting the intensive display mode, note the message(s) that appear and
confirm by pressing the OK button.
Selecting reception signals
> Use the up/down arrow keys to select the available reception signals.
DVB-S for digital satellite channels
DVB-C for digital cable channels
DVB-T for digital terrestrial channels;
Analogue CT for analogue terrestrial and cable channels.
> Use the right/left arrow keys to indicate whether you wish to use the highlighted
reception signal (On) or not (Off).
> Confirm by pressing the OK button.
18
Initial installation
To Next Page
Loading...
General