27
7.5 Receiving encrypted channels
> Insert a CI-/CI+- module with the upper side pointing to the rear in the slot.
> Insert the smartcard into the CI / CI+ module card slot.
7.5.1 Smartcard PIN code
With encrypted channels, programmes that are not suitable for children can be pre-blocked
by means of a parental control code/symbol. To unblock the specific programme it is
necessary to enter the Smartcard PIN code stored on the Smartcard.
> To release the programme use the numeric keypad keys to enter the 4-digit
Smartcard PIN code.
7.6 Volume control
After switching on the television sound is produced according to the power-on volume set
using the sound settings menu.
> To adjust the volume of your TV, press Volume + to increase the volume, and
Volume - to decrease it.
7.6.1 Using mute
> To switch the sound off (mute), press the Sound on/off button - press the key again
to switch the sound back on.
7.6.2 Headphone volume
> While the sound is muted it is possible to operate the Volume + and Volume -
rocker keys to adjust the headphones volume.
7.7 Selecting a different language / sound option
For some channels you have the option of selecting a different sound option (Dolby Digital,
Stereo or Audio Channel 1 or Audio Channel 2) or another language.
> Using option selection you can select the language/sound option you want via the
Audio option.
> If is displayed in the highlight, you can press the Audio channel button to switch
between Stereo
, Audio channel 1 and Audio channel 2 playback.
Encrypted channels
Volume control / Sound selection
ENNL ESCZ FRPL ITHU
To Next Page
Loading...
General