English - 10 -
Remote Control- 2
Inserting the Batteries into the Remote
Remove the battery compartment cover to reveal the
battery compartment. Insert two size AAA batteries.
Make sure the (+) and (-) signs match (observing
correct polarity). Do not mix old and new batteries.
Replace only with same or equivalent type. Place the
cover back on.
To pair remote with the TV
Press and hold the Source button on the remote until
the LED on the remote starts to blink, then release
the Source button. That means the remote is in
pairing mode.
Start device discovery on the TV. Refer to Connecting
Other Wireless Devices section for further information.
Now you will wait for the TV to find your remote.
Select the name of your remote and press OK when
it appears on the TV screen.
When the paring process is successful, the LED on
the remote will go off. If the pairing process fails the
remote will enter sleep mode after 30 seconds.
1. Standby: Switches On / Off the TV
2. Menu: Displays TV menu
3. Directional buttons: Helps navigate menus,
content, etc. and displays the subpages in TXT
mode when pressed Right or Left
4. OK: Confirms user selections, holds the page (in
TXT mode), views Channels menu (DTV mode)
5. Back/Return: Returns to previous screen, previous
menu, opens index page (in TXT mode). Quickly
cycles between previous and current channels
or sources
6. Volume +/-
7. Netflix: Launches the Netflix application
8. Prime Video: Launches the Amazon Prime Video
application
9. My button 1 (*)
10. YouTube: Launches the YouTube application
11. Programme +/-
12. Mute: Completely turns off the volume of the TV
13. Exit: Closes and exits from displayed menus or
returns to previous screen
14. Source: Shows available broadcast and content
sources
15. Internet: Opens the internet browser
To Next Page
Loading...
Need help?
General
