Outdoor temperature
in ºC/ ºF
Outdoor relative
humidity in RH%
Comfort indicator icon
Relative air pressure
history bar graph
Relative air pressure
in hPa / inHg
Press to set the alarm minute (inside alarm setting mode)
Stop the alarm during alarm ringing
Stop snooze mode
Back-light on
SNOOZE/CH key
Active snooze function during alarm ringing
it the manual set mode and alarm setting mode Ex
Switch among display of channels (if more than 1 transmitter is used)
Back-light on
LCD SCREEN
The LCD screen is split into 4 sections displaying the information for time/calendar/alarm/moon
phase, indoor data, weather forecast and outdoor data.
MANUAL SETTINGS:
The following manual settings can be changed when pressing the SET key for:
LCD contrast setting
Time zone setting
Time reception ON/OFF setting
12/24-hour format setting
Manual time setting
Calendar setting
°C/°F temperature setting
hPa / inHg pressure setting
Relative air pressure setting
Weather forecasting icon sensitivity setting
LCD CONTRAST SETTING:
Last digit flashing
The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD 4):
1. Press and hold the SET key until the digit starts flashing.
2. Use the OUT/+ key to view all levels of contrast.
3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone
setting.
TIME ZONE SETTING:
Flashing
The time zone default of the Weather Station is “0”. To set a different time zone:
1. The current time zone value starts flashing.
2. Use the OUT/+ key to set the time zone. The range runs from 0 to -12 and then runs from +12
back to 0 in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Time reception ON/OFF setting.
TIME RECEPTION ON/OFF SETTING:
In area where reception of the DCF time is not possible, the DCF time reception function can be
turn OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1. The digit “ON” will start flashing on the LCD.
2. Use the OUT/+ key to turn OFF the time reception function.
3. Confirm with the SET key and enter the 12/24-hour format setting.
Note:
If the Time Reception function is turn OFF manually, the clock will not attempt any reception
of the DCF time as long as the Time Reception OFF function is activated.
The time reception icon and the “DCF” icon will not be displayed on the LCD.
12/24-HOUR FORMAT SETTING:
The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 24-Hour)
1. Use the OUT/+ key to toggle between “12H” or “24H”.
2. Confirm with the SET key and enter the Manual time setting.
Flashing
Flashing
To Next Page
Loading...
Need help?
General
