EN6
Stop the alarm
C2 – + key (Plus)
To make adjustment for various settings
Stop the alarm
C3 – ALARM key
Enter the alarm setting mode
Switch the alarm ON/ OFF
Stop the alarm
C4 – MIN/MAX / RESET key (Min/ Max temperature and resetting)
Press and hold to reset the MIN/MAX temperature records
Activate the snooze
Exit manual setting modes
Manual settings:
The following manual settings can be done in the setting mode:
Time zone
Time reception DCF ON/OFF
Manual time
Press and hold the SET key for about 3 seconds to advance to the
setting mode:
Time zone setting:
The time zone default is "0" hour. To set a different time zone:
1. The current time zone value starts flashing.
2. Use the + key to set the time zone. The range runs from 0, -1, -
2…-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Time reception On/Off
setting.
Set radio-controlled time reception ON/OFF:
To Next Page
Loading...
