EN2
Buttons
There are seven function buttons:
SET/RCC ALARM +/HEAT/DEW -/MAX/MIN
ALERT CHANNEL SNOOZE/LIGHT
Functions
Year：2019-2099
Date/Month/Day
Indoor/outdoor temperature and humidity
Indoor/outdoor temperature and humidity trend
Low battery icon for station and sensor
24/12 hour selectable
Alarm and snooze function
Weather forecast: Sunny, Partly sunny, Cloudy, Rainy and stormy
Maximum and Minimum temperature/humidity
Seven languages for week (GER, FRE, ITA, DUT, SPA, DAN,ENG)
Time zone： -12/+12HR
DCF Radio clock receiver function
Backlight，HI、LOW、OFF
Heat index and dew point for outdoor
High/Low Temperature alert for indoor and outdoor
Close/Open window tips （When temperature between 20℃- 25℃ and humidity between 40% -70% will display to open the window if not in
the range will display to close）
Moon phase
Can be connected to up to 3 outdoor sensors
Batteries base station(WS6442): 3 x AAA
Batteries outdoor sensor(TX960-TH): 2 x AAA
Initial operation:
Connect the station with a household socket by using the adapter.
When the station is powered, all icons on the LCD display will light up for 3 seconds, and you will hear a beep tone.
The weather station will now start to make a connection to the outdoor remote sensor. This operation takes about 3 minutes and is
displayed by a flashing reception RF antenna symbol in the “OUTDOOR” display area on the receiver.
Remove the outdoor sensor battery compartment cover and insert 2 x AAA batteries observing polarity [ “+” and “–“ marks]. Then close the
battery compartment.
After station has created a connection to the outdoor remote sensor, it will then enter the radio control time reception mode.
Optional: batteries for back-up (no permanent backlight if used without power adapter)
Open weather station battery compartment cover.
Insert 3 x AAA batteries observing polarity [ “+” and “ –“ marks].
Close the battery compartment.
To Next Page
Loading...
Need help?
General
